The I-Lab line of Glovebox and Gas Management Systems are designed as an economical solution for inert research applications.
The I-Lab Glovebox design is based on a modular platform allowing customers to expand existing gloveboxes to meet increasing work flow requirements.
The I-Lab Gas Management Systems provide a < 1ppm O2 and H2O inert atmosphere required for a multitude of air-sensitive applications.
3-Glove Workstation
View Specifications| Internal dimensions | 1524 mm Wide x 764 mm Deep x 897 mm High |
| External dimensions | 2316 mm Wide x 1034 mm Deep x 2024 mm High |
| Internal finish | Type 304 stainless steel, #4 |
| External surfaces | RAL 7035 |
| Wall thickness | 0.105" (2.6 mm) |
| Feedthrough | 4 x DN 40 ISO-KF blank |
| Internal power | 1 x electrical feedthrough |
| Internal power | 1 x fuse protected 6-outlet power strip |
| Shelving | 2 x Height adjustable 304 stainless steel #4 finish. 42.25" (1073 mm) Wide x 9.7" (247 mm) Deep |
| Plumbing | 304 stainless steel tubing |
| Filters | 1 x inlet/1 x outlet HEPA (99.99% vs 0.3 micron MPPS) |
| Lighting | External fluorescent light |
| Power | 100-120 or 200-240 VAC 50/60 Hz 20 Amp |
Non-Modular Box Design
View Specifications| Stand with casters and leveling feet | Leveling feet adjustability |
| Bolt | On left or right side |
| Internal finish | 304 stainless steel #4 surface finish |
| External finish | RAL 7035 |
| Internal tray | 304 stainless steel #4 surface finish |
| Tray size | 11.25" (285 mm) Wide x 22.5" (571 mm) Long |
| Internal/external travel | 13.9" (353 mm) |
| Anodized aluminum doors, vertical opening with gas piston | |
| Manual evacuate/refill valves | |
| Analog vacuum gauge | 0 to -30" Hg |
| Leak rate | < 10-5 mbar l/s |
Small Antechamber, 6" (152 mm) Internal Diameter x 17.3" (441 mm) Internal Length
View Specifications| Internal finish | 6061 anodized aluminum |
| External finish | RAL 7035 |
| Internal/external doors | 6061 anodized aluminum |
| Manual evacuate/refill valve | |
| Analog vacuum gauge | 0 to -30" Hg |
| Leak rate | < 10-5 mbar l/s |
Polycarbonate (Abrasion Resistant) Window 3/8" (9.5 mm) Thick
View Specifications| Viewing size | 41.8" (1061 mm) Wide x 30.2" (767 mm) High |
Circular Glove Ports
View Specifications| Black Delrin, 8" glove port | 0.015" (0.4 mm) thick butyl rubber gloves, hand size 9.75 |
I-Lab Gas Management System
View Specifications| Single column gas purification system | |
| O2 and H2O purity level | |
| O2 capacity = | 43 L |
| H2O capacity = | 1800 g |
| Automated purifier column valves | Interlocked with the blower. Blower will not run if the valves fail to open |
| Variable speed circulation blower | 120 cfm max flow rate blower |
| Max flow rate through purifier column | 60 cfm |
PLC Control System
View Specifications| Color touch screen |
Automatic Pressure Control
View Specifications| Automatic pressure control | (+/- 15 mbar) |
| Manual pressure control | Footswitch |
Fully Automatic Regeneration Sequence
View Specifications| Manual purge valve |
Vacuum Pump
View Specifications| Vacuum pump | 10 cfm (17 m3/h) rotary vane pump with oil mist eliminator & oil return kit |
Integrated Oxygen Analyzer
View Specifications| Range 0-1000 ppm |
| Zirconia sensor as standard |
| Or electrochemical sensor for solvent compatibility |
Integrated Moisture Analyzer
View Specifications| Range 0-1000 ppm |
Overall System Leak Rate
View Specifications| <0.05vol%/h (ISO 10648-2) |
System Gas Requirements
View Specifications| Working gas | ³ 99.995% N2 or Ar |
| Working gas pressure | 55 psi (3.8 bar) |
| Working gas flow rate | 250 l/min |
| Regeneration gas | 3-7% H2, balance N2 or Ar |
| Regeneration gas pressure | 5-7 psi (0.3-0.5 bar) |
| Regeneration gas flow rate | 30 l/min |